Description
The Glass Edge Thermocutter and its accessories (blades) are tools aimed to clean the edges of laminated glass after the lamination process has been completed.
EVA Thermal Cutter to clean laminated glass edges overflowed remains of EVA, PVB, SGP etc.
Best AZTC-20 thermocutter replacement
Application:
When making laminated glass with EVA film(or PVB film, SGP film) there may be some overflowed EVA remains (or PVB remains, SGP remains) on the edges of laminated glass after heating in the oven, EVA Thermal Cutter is the handhold tool to clean the laminated glass edges remains easily.
How it work:
The blade of the EVA Thermal Cutter can be up to 500℃ in seconds. The EVA Thermal Cutter use the ultra high temperature heat to cut the EVA remains (or PVB remains, SGP remains) of the laminated glass edges.
The EVA Thermal Cutter cleans the overflowed remains NOT by strength or sharp, but by Ultra High Temperature Heat: 500℃. So whether the interlayer film is EVA FILM, PVB FILM, or SGP INTERLAYER, the result is the same.
CUTTER TERMICO
COLTELLO A CALDO PER FILM EVA E PVB
Strumento utile per l'asportazione del film EVA o PVB dai bordi del vetro dopo la laminazione
leggero e maneggevole
dotato di potenziometro per la regolazione della temperatura
la lama raggiunge la temperatura massima di lavorazioni in pochi secondi
Il kit è composto da:
coltello termico 230V-50HZ-100W
brugola
spazzola per la pulizia
valigetta per la conservazione ed il trasporto
Disponibilità di lame di vario tipo e forma per la pulizia dei vetri stratificati con qulasiasi tipo di intercalare
