Description
Blades Replacement for AZTC20 Thermocutters Hot Knives
Choose the right hot knife blade for your application. These blades are designed to concentrate heat along the cutting edge for optimal cutting temperature. Before insertion into the material, the blade temperature will range from 100°C to 800°C, depending on the blade type and the hot cutter used. Once the blade enters the material, it gradually cools. This temperature is determined by the thermal properties and thermal conductivity of the material being cut, which determines the cutting speed. The blade's cutting flange design ensures even heating of the cutting edge.
These blades are made by Durney in China, can replace the hot knife blade numbers - T2, T3, T11, T01, T02, T04, T05, T06, T10, T08, T015, T011, T012, T013, DPM10.
Cutting and Deburring:
Natural and synthetic rubber
30-80 Shore A rubber sheets
Rubber with fabric
PVC foils, and sheets
Cutting and heat-sealing textile fleece, industrial tubing, and profile gaskets.
Automotive interiors and trim, instrument panel cutouts.
PE, PS, and PU foam roof and wall insulation panels up to 125 mm thick. Seamless, no cold bridges.
Cutting silicone gaskets for construction joints.
Floor and wall cladding, including asphalt.
Stress-free cutting of PVC and neoprene profile gaskets for door and window frames.
Clean cuts for subsequent welding or gluing.
Electrical installations, such as conduits and trunking. Insulating cables and wires.
